Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Numerical Solution
We add post-processing entities before clicking Solve. Note that the post-processing entities can also be added after the Solve.
Deformation
...
Stresses, Reaction Forces and Moment Forces
Now, ANSYS will be told to solve for the reaction forces and the reaction moments at the two fixed supports, the direct stress, the minimum combined stress and the maximum combined stress. First (Right Click Solution) > Insert > Beam Tool > Beam Tool.
The stresses will be specified at this point.
(Right Click) Beam Tool > Insert > Beam Tool > Stress > Minimum Bending Stress
(Right Click) Beam Tool > Insert > Beam Tool > Stress > Maximum Bending Stress
...
Note |
---|
Under Construction |
Widget Connector | ||||||
---|---|---|---|---|---|---|
|
...
Solve
In order to solve, click on the solve button, , which is located near the top of the Setup window. ANSYS will obtain the numerical solution where the ANSYS solver will form the stiffness matrix for each line element, assemble them into the global stiffness matrix and invert it to get the nodal displacements and slopes. It will then extract the requested results and populate the results objects in the tree.
Go to Step 6: Numerical Results
...