Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Numerical Results
Start the post-processor (CFD-Post): In project window, right-click Results and select Edit.
Pressure Contours
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/KU-zrgbSWO0" frameborder="0" allowfullscreen></iframe> |
Note: When you open CFD-Post, it opens with a plain wireframe image of the model. In the above video, the video starts off with the 'Velocity Vectors' in the background which is not the case when you start CFD-Post.
Velocity Magnitude Contours
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/VXyIicrrAdM" frameborder="0" allowfullscreen></iframe> |
Streamlines
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/XNaCs2hHK0M" frameborder="0" allowfullscreen></iframe> |
Pressure vs. theta
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/B-6fAco0eVE" frameborder="0" allowfullscreen></iframe> |
Panel |
---|
Author: John Singleton and Rajesh Bhaskaran Problem Specification |
Note |
---|
Under Construction!! |
6. Results
Velocity Vectors
...
https://confluence.cornell.edu/download/attachments/144972154/VelVect2_Full.png
Stream Lines
...
https://confluence.cornell.edu/download/attachments/144972154/StreamLines2_Full.png
Vorticity
Results > Graphics and Animations > Contours > Set Up...
...
https://confluence.cornell.edu/download/attachments/144972154/Vort_Full.png
Drag Coefficient
Reports > Result Reports > Forces > Setup
Then, click Print. The command pane will now display the following results: the pressure force, the viscous force, the total force, the pressure force coefficient, the viscous force coefficient and the drag force coefficient. As one can see from the following image link, FLUENT yields 2.04 for the value of the drag coefficient. newwindow
Go to Step 7: Verification & Validation
See and rate the complete Learning Module