...

...

...

Verification & Validation

Verification and validation is a formal process for checking results. Each of these terms has a specific meaning which we won't get into here. We'll act like consultants and do the bare minimum: we'll refine the mesh and make sure that the results are nearly independent of the mesh. We will also repeat the comparison with experiment which is a very important way to check simulation results.

Refine Mesh

Let's repeat the solution on a finer mesh with smaller cells. In workbench, under Forced Convection project, right click on Fluid Flow (FLUENT) and click duplicate. Rename the duplicate project to Force Convection Refined Mesh. You should have two project cells in workbench.
Image Removed

Double click on Mesh for Forced Convection Refined Mesh. The ANSYS Mesher window will open. Under Outline, expand mesh tree and click on Edge Sizing.
Image Removed 

Highlight "Edge Sizing". Under Details of "Edge Sizing", increase Number of Divisions to 50. This will refine the mesh in the radial direction.

Highlight "Edge Sizing 2". Under Details of "Edge Sizing 2", decrease element size to be 0.02. This will refine the mesh in the axial direction.

Click Update Image Removed to generate the new mesh. If you refer back to the mesh details and expand statistics, you will notice that the number of elements has increased to 15300, compared to 5508 of the original mesh.

...

Checklist

<iframe width="640" height="360" src="https://www.youtube.com/embed/odNQ8hHG7MA" frameborder="0" allowfullscreen></iframe>

Check Boundary Conditions

 <iframe width="640" height="360" src="https://www.youtube.com/embed/Fzrmdp_cS38" frameborder="0" allowfullscreen></iframe>

Check Mass and Energy Conservation

 <iframe width="640" height="360" src="https://www.youtube.com/embed/0ThDb-tVBQA" frameborder="0" allowfullscreen></iframe>

Check Energy Conservation via Mixed Mean Temperature Variation (Optional)

<iframe width="640" height="360" src="//www.youtube.com/embed/YXkGqLC64-Q" frameborder="0" allowfullscreen></iframe>

Check Numerical Error

 <iframe width="640" height="360" src="https://www.youtube.com/embed/Xmc8fLUX3hc" frameborder="0" allowfullscreen></iframe>

Validation Results

 <iframe width="640" height="360" src="https://www.youtube.com/embed/fkZnLfcbLlc" frameborder="0" allowfullscreen></iframe>

Go to Exercises

Finally, double click on Results cell of Forced Convection to compare. Under Outline tab, click on the results of interest to analyze (pretty sweet, huh?).

See and rate the complete Learning Module

Go to all FLUENT Learning Modules