Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Excerpt

Instructions on how to install printers onto personal or Cornell computer devices.

See also

  • Children Display
    depth3
    styleh3
    excerpttrue
    excerptTypesimple

Research Printers

  • Most, if not all, research group printers are accessible from anywhere on campus. No VPN or special setup is required other than initial setup.
  • The below instructions presume you are connected either through a wired campus network connection or via RedRover/Eduroam.
  • Printing from a non-Cornell network (home, hotel, 3G/4G), requires the use of CUVPN.

...

Install and configure your print drivers

To install a group printer in Windows 7 ( other Windows editions should be similar ) –

...

These instructions should work in most cases. Some printers may require driver download from manufacturer and manual installation.

See label on the printer for the printer name.

Installation on Windows

Windows XP

  • Navigate to Printers and Faxes through the control panel
  • shift+right click within white space of the window → run as... → add printer
  • use either local admin account or ADM account
  • Follow rest of instructions for windows: adding a port and printer

NOTE: Due to being an older OS and not supported the specific printer/driver may not be able to be found. It is possible to grab the driver from another similar machine, just be aware that finding the correct driver may be close to impossible. 

Current Windows (7, 8, 10) 

  • Open Control Panel, Devices & Printers
  • Click on "add a printer"
  • Choose add a LOCAL printer
  • Create a new port – standard TCP/IP

...

  • Enter the printer name for the address

      ...

        • See label on the printer for the printer name (please avoid using the IP address, especially since it can change!)

      ...

      • Finish driver & printer installation by providing the driver as necessary and naming the printer something you prefer. In most cases, your computer will detect & install drivers.

      ...

      Installation on

      ...

      Mac OS X (editions of Mac OS X might have slightly different wording

      ...

      )

      ...

      • Click on the + sign to add a printer

      ...

      • Click on the IP system

      ...

      • Enter the printer name for the address

          ...

            • See label on the printer for the name (please avoid using the IP address)

          ...

          • Change the protocol to HP JetDirect Socket (even if the printer is not an HP printer)

          ...

          • Leave the Queue empty, name and locate the printer something you prefer and will remember

          ...

          • Correct the printer driver as

          ...

          • necessary  (generic drivers may work, but may cause problems with pdf printing, duplexing, or color)
          • Ensure you have the required or desired default settings when printing (e.g.: duplex printing as opposed to single sided).

          ...

          If you have any questions, problems, or concerns on connecting to your group's group’s servers and/or printers, please first attempt to work with your group's group’s computer person and when necessary, please contact Chemistry IT at <crcf//AT//cornell.edu> ChemIT@cornell.edu or stop by 250 140 Baker Lab for assistance.