Vertical Axis Wind Turbine - Part 1

...

This tutorial has two parts. The first part will analyse the flow using Moving Frame of Reference, while the second part will used use the Sliding Mesh feature.

...

Note that this is a Darrieus VAWT, which is Lift based, ; in contrast to the Savonius VAWT, which is Drag based. This is an intensive field of research, and at Cornell we have the Fluid Dynamics Research Laboratory, directed by Prof. Charles Williamson. In the last section, we will compare results with the experimental data obtain by the lab.

...

 * Note that this is an important simplification. Here we 're are considering that the turbine is already spinning independently of the flow, what which is clearly not true, since the flow is responsible for spinning the turbine. There is only one stable combination of incoming flow velocity and RPM, given the geometry and mass of the turbine. However, modeling the movement of a geometry caused by the flow is considerably difficult, and require requires the use of a method called "6DOF solver". A tutorial on that is intended to be made in the future. For now, let's stick to a simpler analysis, first a steady state picture of the problem (this tutorial), and later a transient analysis (part 2 of this tutorial).

Go to Step 1: Pre-Analysis & Start-Up

Go to all (ANSYS or FLUENT ) Learning Modules