Include Page |
---|
...
|
...
|
...
Include Page | ||||
---|---|---|---|---|
|
Verification & Validation
...
Verification
...
Steps
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/3RMqaGN74Cg" frameborder="0" allowfullscreen></iframe> |
Check Equilibrium
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/FlM9BMQARSM" frameborder="0" allowfullscreen></iframe> |
Check Mesh Dependence
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/GNpoYKqrCTI" frameborder="0" allowfullscreen></iframe> |
Verification of Maximum Bending Stress and Maximum Total Deformation
The ANSYS results will be now verified by comparing to the following results obtained using the Euler-Bernoulli beam theory in the Pre_Analysis.
The ANSYS simulation outputed 4.6352MPa which is very close to the results from the Euler-Bernoulli beam theory. Thus, the maximum bending stress has been verified.
Return to Problem Specification
See and rate the complete Learning Module
Go to all ANSYS Learning Modules
...