...
- Solve the problem with manifold where the water is not being pull up in the two tubes farthest away from the drainage hole.
- Learn to use Program: Process Controller
- Reconnected the pressure sensor in the right wayand calibrated using process controller
- Checked pump Pumps connected with the computer Learn to use Program: Process Controllerand tested stamp box
- Discussed wiki midterm report
...
- Continue to document experimental setup
- Water is equally pulled up the plate settler tubes
- System is hydraulically sound and has no leaks
Issues
- Need Pump May need to pump water faster into the Bucketbucket
- Need two buffer buffers setup to control pressure
*Pump does not seem to be pulling water through the waste valve of the flou blanket columnin the system and prevent the jerky flow caused by the peristaltic pumps - Wasting from the settling column sometimes does not work do to a pinched tube, looking into a way to re-route the tube to prevent pinching