Mesh

Once you have exited the modeling window, initiate the meshing process by clicking on Mesh in the Workflow.

Image RemovedImage Added

Set Mesh Controls

Under Global Sizing, change the Size function method to Curvature and proximity. The curvature option will automatically refine the mesh near the curved surfaces of the body.  The proximity option will automatically refine the mesh between the bottom of the body and the ground.  In the Boundary Layer Settings, under Collision avoidance, use the Layer compression setting. This will ensure continuous boundary layers around the body, which can improve accuracy for external flows.

Image RemovedImage Added

AIM will prompt you to fix the boundary layer before generating the mesh. Click on Boundary Layer under Mesh Controls. Select the faces of the volume in contact with the Ahmed body, as shown below. The simplest way to do this is to drag a box around the Ahmed body, from the upper left to the lower right.  AIM will select all faces that are completely enclosed.

Image Modified

Generate Mesh

Return to the Mesh panel, then click Generate Mesh under Output or at the top of the screen by the status window for Mesh. AIM will detect that you are ready to generate the mesh and highlight the buttons in blue.

Image Modified

Go to Step 4: Physics Setup

Go to all ( ANSYS or FLUENT) AIM Learning Modules