Numerical Results

Deformed Shape

The following video shows how to plot the deformed shape and use it to check if the displacement constraints have been applied correctly.

<iframe width="600" height="338" src="//www.youtube.com/embed/yVtxuL9Nxy8?rel=0" frameborder="0" allowfullscreen></iframe>

Summary of steps in the above video:

1. Under the tree, highlight Solution
2. Select Deformation > Total Deformation
3. Solve

Sigma_x Contours

We next take a look at

 $\sigma_x$

<iframe width="600" height="338" src="//www.youtube.com/embed/35YXCKqC1Ng?rel=0" frameborder="0" allowfullscreen></iframe>

Summary of steps in the above video:

1. Under the tree, highlight Solution
2. Select Stress > Normal Stress
3. Check that it is in the X direction and rename to sigma_x
4. Solve

You can save an image of the contours to a file using the instructions below.

<iframe width="600" height="338" src="//www.youtube.com/embed/4PGJ90-lg0o?rel=0" frameborder="0" allowfullscreen></iframe>

It's incredibly hard to describe in words where this button is located. Watch the video and skip to 0:18 for the location. OR use the snipping tool.

Below, we take a closer look at the

 $\sigma_x$

<iframe width="600" height="338" src="//www.youtube.com/embed/1YSyadkkzms?rel=0" frameborder="0" allowfullscreen></iframe>

Summary of steps in the above video:

1. Next to Probe, click on Max and Min to enable the location of highest and lowest normal stress in the x direction

We interrogate

 $\sigma_x$

<iframe width="600" height="338" src="//www.youtube.com/embed/YM_YUta3-78?rel=0" frameborder="0" allowfullscreen></iframe>

Sigma_x along a Line using "Path" Operations

First, we create two coordinate systems which we'll use to define the start and end points of the line.

<iframe width="600" height="338" src="//www.youtube.com/embed/R-w8mA2MzSk?rel=0" frameborder="0" allowfullscreen></iframe>

Second, we create the desired line on the front face.

<iframe width="600" height="338" src="//www.youtube.com/embed/dDPSyw6dNXE?rel=0" frameborder="0" allowfullscreen></iframe>

Last, we extract

 $\sigma_x$

<iframe width="600" height="338" src="//www.youtube.com/embed/kJfABDOVfIo?rel=0" frameborder="0" allowfullscreen></iframe>

Go to Step 7: Verification & Validation

Go to all ANSYS Learning Modules