Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migration of unmigrated content due to installation of a new plugin

UNDER CONSTRUCTION

Panel

Author: Daniel Kantor and Andrew Einstein, Cornell University

Problem Specification
1. Create Geometry in GAMBIT
2. Mesh Geometry in GAMBIT
3. Specify Boundary Types in GAMBIT
4. Set Up Problem in FLUENT
5. Solve!
6. Analyze Results
7. Refine Mesh
Problem 1

Step 6: Analyze Results

For all of our analysis we will be looking at the Sphere surface under Surfaces, unless otherwise noted.

Plot Velocity Vectors

Let's plot the velocity vectors obtained from the FLUENT solution.

Display > Vectors

Set the Scale to 1 and Skip to 0. Click Display.

Image Added
 
 If we look closely at the sphere we can start to see where the separation occurs.

Info
titleZoom in the cylinder using the middle mouse button.

Now, let's take a look at the Contour of Velocity magnitude around the sphere.

Display > Contours

Under Contours of, choose Velocity... and Velocity Magnitude. Select the Filled option. Increase the number of contour levels plotted: set Levels to 100.

Image Added
Click Display.


Image Added

We see the flow is mostly what we would expect in this case.

Now, let's take a look at the Contour of Turbulent Intensity around the sphere. This will give us a picture of the turbulence that is occurring around the sphere.

Display > Contours

Under Contours of, choose Turbulence... and Turbulent Intensity. Select the Filled option. Increase the number of contour levels plotted: set Levels to 100.

 Click Display.


Image Added

Pressure Coefficient

 
Pressure coefficient is a dimensionless parameter defined by the equation Image Added where p is the static pressure, p ref is the reference pressure, and q ref is the reference dynamic pressure defined by

Latex
\large $$ q_{ref} = {1 \over 2}{\rho_{ref}v_{ref}^2}$$

The reference pressure, density, and velocity are defined in the Reference Values panel in Step 5.

Let's plot pressure coefficient vs x-direction along the cylinder.

Plot > XY Plot...

Change the Y Axis Function to Pressure..., followed by Pressure Coefficient. Then, select Sphere under Surfaces.

Image Added

Click Plot.


Image Added

We see that there is a lot of scatter in our data, so we will be creating a line along the sphere to try and get a better picture of the pressure coefficient. To accomplish this we will create a surface of Z-axis position zero, and plot the line y^2+(x-12)^2-9, which is the equation of a ring around the sphere in the x-y plane.

Surface > Iso-Surface

Under Surface of Constant choose Grid... and Z-Coordinate. Under Iso-Values input 0. This will create a plane in our flow in which the Z coordinate is zero everywhere.

  Image Added

Call this Zero_Plane and click Create.

Define > Custom Field Functions

 Here we input our formula y^2+(x-12)^2 - 9 under Definition. To do use the Field Functions section and choose Grid... and choose X-Coordinate and Y-Coordinate for the "x" and "y" in the above formula.


Image Added

Call this Ring and click Define.

Surface > Iso-Surface

Now under Surface of Constant choose Custom Field Functions and choose our function Ring. Keep the default Iso-Values to 0. Then, within From Surfaces select Zero_Plane.

Image Added
Call this CpLine and click Create.

We have now created the necessary line around the sphere to view the data better. Follow the same steps as before to plot the Pressure Coefficient, except that under Surfaces choose CpLine.

We now see that the data is has less scatter (this effect, however, is far more significant on a more refined mesh). 


Image Added

Comparison

With our simulation data, we can now compare the Fluent with experimental data. Click HERE to download the experimental data. The two sets of data for Pressure Coefficients are shown here:

Image Added

The Red dots are the experimental data (labeled "sphere1"), while the white dots are our data (labeled CPline).

Lets display the coefficient of drag:

 Report > Forces

 Make sure that under Force Vector the X has a 1 by it (this represents the drag on the sphere), and that under Wall Zones, sphere is highlighted.


Image Added

Click Print.

 The two sets of data for drag coefficient are shown here:

Experimental

0.1

Simulation

0.4485

Go to Step 7: Refine Mesh

See and rate the complete Learning Module

Go to all FLUENT Learning Modules