Verification & Validation

"Verification and validation" can be thought of as a formal process for checking results. We previously performed some sanity checks on the deformed shape. A further basic check is how the results change on refining the mesh. The following video shows how to recalculate the results on a refined mesh.

<iframe width="600" height="338" src="//www.youtube.com/embed/K87BU7fijRA?rel=0" frameborder="0" allowfullscreen></iframe>

Summary of steps in the above video:

1. Easily investigate the change of deformed shape and max deformation of the beam with mesh refinement. Make a copy of the model:
   1. In Project Schematic, right click on Model.
   2. Select Duplicate.
   3. Rename the copied project “2D Beam (refined mesh).
2. Refine the mesh in the copied project:
   1. Double click on Setup in the copied version of the project to launch Mechanical.
   2. In the Project Tree, click on Mesh > Face Sizing.
   3. Change Element Size to 0.8in.
   4. Click Update.
3. To redo the solution on the refined mesh:
   1. Click Solve. 

We see from the above video that at least one more level of mesh refinement is necessary. Please carry that out. Note that we also need to closely interrogate the comparison with Euler-Bernoulli beam theory as part of the "Verification and validation" process.

...