SimCafe

Space shortcuts

Child pages
  • ANSYS - Disks in Point Contact - Step 1

Versions Compared

Old Version 21

changes.mady.by.user user-87699

Saved on

compared with

New Version 22

changes.mady.by.user user-87699

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 4.0
Panel

Problem Specification
1. Start-up and preliminary set-up
2. Specify element type and constants
3. Specify material properties
4. Specify geometry
5. Mesh geometry
6. Specify boundary conditions
7. Solve
8. Postprocess the results
9. Validate the results

...

Enter the location of folder contact as your Working directory.

Specify diskscontact as your Initial jobname. Click on Run.
Resize the ANSYS windows as shown in this screen arrangement so that you can read instructions in the browser window and implement them in ANSYS.

...

In the Preferences for GUI Filtering dialog box, click on the box next to Structural so that a tick mark appears in the box. Click OK.

Recall that this is an optional step that customizes the graphical user interface so that only menu options valid for structural problems are made available during the ANSYS session.

...

Enter the parameter value for R1:
R1=60
Click Accept.

Similarly, enter the other parameter values and click Accept after each.

R1p=130
R2=80
R2p=200
inter=1e-5
p=4500
E=2e5
nu=0.29

Close the Scalar Parameters window. Note that we have specified the radii in mm, the load p in N and the Young's modulus in N/mm2. Therefore, the displacement results we obtain will be in mm and the stresses in N/mm2.

...