Page History

...

Recall that during the Start-Up step, we added a material with the desired values of Young's modulus and Poisson's ratio. This just added the material to the list of materials available within this project. We need to assign this material from the material list to the model as shown in the following video. Otherwise, ANSYS will use the Young's modulus and Poisson's ratio for structural steel which is the default. This step is easy to overlook.

{html}<iframe width="600" height="338" src="//www.youtube.com/embed/Z5RX8lpcWhc?rel=0" frameborder="0" allowfullscreen></iframe>{html}

Next, we apply the boundary conditions i.e. displacement constraints at the 3 left holes and traction on part of the right hole. Boundary surfaces where we neither apply a displacement constraint nor traction are assumed by ANSYS to be free surfaces with zero traction.

{html}<iframe width="600" height="338" src="//www.youtube.com/embed/zJCJFvkYchw?rel=0" frameborder="0" allowfullscreen></iframe>{html}

Go to Step 5: Numerical Solution

...