Sign-up for free online course on ANSYS simulations!| Include Page | ||||
|---|---|---|---|---|
|
...
| Include Page |
|---|
...
Author: Ben Mullen, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
|
Numerical Results
Now, we will look at the results of the simulation.
Temperature
In the Outline window, click the temperature solution we created 
. you should see the following
...
The temperature is 122 degrees Celsius throughout, which is to be expected.
Total Deformation
In the Outline window, click the deformation solution we created 
. you should see the following
...
The maximum deformation is .002 m, which matches our boundary condition.
Normal Stress
In the Outline window, expand the beam tool folder, and click on Direct Stress. You should see the following
...
The stress is constant throughout.
Go to Step 7 - : Verification & Validation