...
We want 30 divisions on each of the vertical edges; so select Interval Count from the drop down box under Spacing and enter 30
in the text box to its left.
Click Apply.
If you zoom in on the right edge, you should see the following:
(Click picture for larger image)
Note that the mesh spacing is smaller near the wall as indicated by the blue circles on the edge.
Recreate Face Mesh
The next step is to recreate the face mesh on top of these edge meshes. This is the same procedure as in the previous tutorial:
Operation Toolpad > Mesh Command Button > Face Command Button Button > Mesh Faces
Shift left-click on the face and click Apply. The meshed area should look like this after zooming in:
...