AutoCAD Sedimentation Tank Program Inputs
Variable Name | Description |
---|---|
NDSedPipeEntrance | Nominal diameter of entrance pipe to sedimentation tank |
ENPipeSpec | Enumerated type |
NDSedSludge | Sludge pipe diameter in sedimentation tank |
LSed | Length of sedimentation tank |
HSed | Height of sedimentation tank wall |
WSed | Width of sedimentation tank |
TPlantWall | Thickness of tank wall of sedimentation tank |
HWSed | Water depth of the sedimentation tank |
TMp | Thickness of Main Platform |
HSedAbove | The height of water above the top of the plate settlers |
LSedInletOrifice |
|
HSedInletOrifice |
|
TSedInletSlope |
|
NSedInletSlope |
|
ANSedBottom | Sedimentation tank bottom slope |
ANSedSludgeBottom |
|
NDSedLaunder | Nominal diameter of launder |
HChannel | Inside height of channel from flocculation tank to sedimentation tanks |
WChannel | Width of channel between flocculation and sedimentation tank |
TChannelWall | Thickness of channel wall |
WEChannel |
|
HEChannel |
|
TEChannelWall |
|
HSedBelow | The height of bottom of sedimentation tank to the bottom of the plate settlers |
DSedLaunderOrifice | Diameter of launder orifices |
NSedLaunderOrifice | Number of orifices in the sedimentation tank launder |
BSedLaunderOrifice | Spacing between orifices throughout the launder |
NSedTanks | Number of sedimentation tanks |
DSedSludgeOrifice | Diameter of orifices in sludge pipe |
NSedSludgeOrifice | Number of sludge orifices |
BSedSludgeOrifice | Orifice spacing in sedimentation tank draining |
ANSedPlate | Degree plate settlers are installed relative to the horizontal |
AmpSedPlate | Amplitude of curves in sedimentation tank lamina |
TSedPlate | Thickness of plate settlers |
PerSedPlate | Period of the curves for the plate settlers |
NSedPlateCol | Number of columns of plate settlers - always equals 1 |
LSedPlate | Length of plate settlers in the sedimentation tank |
NSedPlates | Number of plate settlers in sedimentation tank |
BSedPlate | Plate settler spacing in the sedimentation tank |
laminay |
|
LChannelInlet |
|
WChannelInlet |
|
tankorigin |
|
SSedInlet | Distance between the bottom of the sedimentation tank and the inlet pipes |