Wiki Markup |
---|
h1. General Program Information {float:left|border=2px solid black} !tank1.JPG! Northeast Isometric View {float} \\ \\ h3. Input Definitions h5. Inputs needed to call the tank function tank{~}origin~ \- a 3 by 1 matrix with x,y,z positions corresponding to the point where the tank will be drawn tank{~}dim~ \- a 3 by 1 matrix with x,y,z positions corresponding to the length, width and height dimensions of the tank * x: tank.dim{~}0~ = length * y: tank.dim{~}1~ = width * z: tank.dim{~}2~ = height thick - the thickness of the wall of the tank h5. Inputs defined with the tank function p1= * x : tank.origin{~}0~ \- tank.dim{~}0~ * y : tank.origin{~}1~ + tank.dim{~}1~ * z : tank.origin{~}2~ + tank.dim{~}2~ p2= * x : tank.origin{~}0~ + thick * y : tank.origin{~}1~ \- thick * z : tank.origin{~}2~ \- thick p3= * x : tank.origin{~}0~ \- tank.dim{~}0~ \- thick * y : tank.origin{~}1~ + tank.dim{~}1~ + thick * z : tank.origin{~}2~ + tank.dim{~}2~ win1= * x : tank.origin{~}0~ + thick + zc * y : tank.origin{~}1~ \- thick - zc * z : tank.origin{~}2~ win2= * x : tank.origin{~}0~ \- tank.dim{~}0~ \- zc * y : tank.origin{~}1~ + tank.dim{~}1~ + zc * z : tank.origin{~}2~ + tank.dim{~}2~ *Note:* zc corresponds to a zoom constant used within Autocad. It is defined in the basics file. h1. Technical Program Outline *Note:* All coordinates are referenced in top view in the program unless otherwise specified {float:left|border=2px solid black} !tank2.JPG! {float} *zoom{*}{*}{~}win{~}*\- zooms on a window space directly around where the tank is to be drawn zoom{~}win~ <-\- zoom{~}wina~(win1,win2) win1= * x : tank.origin{~}0~ + thick + zc * y : tank.origin{~}1~ \- thick - zc * z : tank.origin{~}2~ win2= * x : tank.origin{~}0~ \- tank.dim{~}0~ \- zc * y : tank.origin{~}1~ + tank.dim{~}1~ + zc * z : tank.origin{~}2~ + tank.dim{~}2~ \\ \\ {float:left|border=2px solid black} !tank5.JPG! Top View !tank3.JPG! Southwest Isometric View {float} *box1* \- Draws the smaller of the two boxes to create the tank box1 <-\- boxA(tank{~}origin~,p1) tank{~}origin~ : tank{~}origin~ p1= * x : tank.origin{~}0~ \- tank.dim{~}0~ * y : tank.origin{~}1~ + tank.dim{~}1~ * z : tank.origin{~}2~ + tank.dim{~}2~ \\ \\ {float:left|border=2px solid black} !tank4.JPG! Front View !tank6.JPG! Top View !tank7.JPG! Soutwest Isometric View {float} *box2* \- Draws the larger of the two boxes to create the tank box2 <-\- boxA(p2,p3) p2= * x : tank.origin{~}0~ + thick * y : tank.origin{~}1~ \- thick * z : tank.origin{~}2~ \- thick p3= * x : tank.origin{~}0~ \- tank.dim{~}0~ \- thick * y : tank.origin{~}1~ + tank.dim{~}1~ + thick * z : tank.origin{~}2~ + tank.dim{~}2~ *subtract* \- In order to makecreate the tankhollow hollowbox, the inner box must be subtracted from the outer box. The subtract function selects tank{~}origin~, on the edge of the inner box, to select the inner box as the piece to be subtracted. The subtract function then selects p2, on the edge of the outer box, to select the outer box to subtract from. subtract <-\- subtractD(p2,tank{~}origin~) p2= * x : tank.origin{~}0~ + thick * y : tank.origin{~}1~ \- thick * z : tank.origin{~}2~ \- thick tank{~}origin~ : tank{~}origin~ \\ \\ {float:left|border=2px solid black} !tank1.JPG! Northeast Isometric {float} |
Page History
Overview
Content Tools