...
At this stage, the turbulence model that was going to be used for modeling was set up. Standard k-ε was used as the turbulence model. After this, the material was defined. Water was selected from the FLUENT database as working fluid. After defining operating conditions and making sure that the boundary conditions set in Gambit was correct, the initial conditions were set up. Finally, the solution was obtained by iterating until the solution was converged. With the solution obtained, various results were then analyzed.
3. Results and Discussions
Some of the important results that are the velocity vectors, contour of pressure coefficient, contours of pressure coefficient, contours of strain rate and contours of turbulence dissipation rate.
