General Program Information
Input Definitions
- origin is the center point of the outlet of the first sedimentation tank
- width.sed is the distance between the outlets of the sedimentation tanks or the width of the sedimentation tanks from the center line of the wall on either side of a tank
- lvltank.dim is a 3,1 matrix with the x,y,z dimensions of the tank
- Δ x is the distance in the x direction from in a top view from the outlet of the sed tanks first sedimentation tank (or the origin of these pipesthe first pipe) to the outside wall of the leveling tank
- Δ y is the distance in the y direction from in a top view from the outlet of the sed tanks first sedimentation tank (or the origin of these pipesthe first pipe) to the outside wall of the leveling tank
- Δ z is the distance in the z direction from in a top view from the outlet of the sed tanks first sedimentation tank (or the origin of these pipesthe first pipe) to the bottom wall of the platform
- offset is the tank x dimension was divided by the number of tanks to evenly space the pipes
- lvltank.thick is the thickness of the walls of the leveling tank
- thick.platform is the thickness of the platform
- R1 is the inner radius of the pipes leading to the leveling tank
- R.main is the inner radius of the effluent pipe
- H.main is the height of the effluent pipe (or the water level in the leveling tank)
- n is the number of sedimentation tanksElbowRadius is the radius of curvature of the elbow
- disp is the displacement of the center of the pipes coming up into the leveling tanks from the inside wall of the tank
Notes
- All coordinates correspond to a top view.
- width.sed is the distance between the outlets of the sed tanks or the width of the sed tanks from the center line of the wall on either side of a tank * Note that the floor of the leveling tank is at the same elevation as the top of the platform L.pipe1
...