Include Page | ||||
---|---|---|---|---|
|
Description:
This page has helpful resources for the Fall MAE 4700 Wing Project which includes a demo video with no sound, a project outline of steps in ANSYS, and an FAQ that will be updated as questions come in.
...
Please note that this video is a demonstration of me creating a simple geometry. There is no sound in the video. Creating the geometry/solution can be achieved in many different methods. This video is simply an example.
Here is the .txt file that was used in this tutorial:
View file | ||||
---|---|---|---|---|
|
Mesh: The video below has a mesh size that is much smaller than you need. Realistically, an element size of around 1 meter is a good start and will give you a reasonable mesh to explore mesh convergence with.
Geometry Creation Video
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/hN0-WQaMztY" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> |
Demonstration Video
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/3UMF_X4qfs8" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> |
...
Summary of Steps:
- Static Structural
...
- Add Total Deformation
- Add Equivalent (von-Misses)
7. Reiteration
Reiterate with varying numbers of spars/ribs, varying locations, and different thicknesses. For varying thickness, look at setting up a parameter. This tutorial should help:
https://confluence.cornell.edu/display/SIMULATION/ANSYS+-+Plate+With+a+Hole+Optimization