...

Model Setup

Note: Around the 2min 13 25 second part of the video below, it asks you to turn off the flow equation. If an additional step needs to be taken if you are using ANSYS software versions 2020 R1 or above newer (includes Apps on Demand), you will also need to turn off the Turbulence model. Here is a picture of what this should look like when you get to this step.

Image Removed

. In these newer software versions, the default Viscous Model in Fluent (the Model Setup step) is SST K-Omega and should instead be Laminar. To do this, simply double click on Viscous under Models and change it to Laminar.

Image Added 

Watch the following video for how to set up the physics in Fluent:

...