Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Mesh
...
Creating an Unstructured Mesh
Watch the following video for a demonstration on how to create an unstructured mesh for the airfoil using "inflation" and "sphere of influence" features in the ANSYS mesher. The advantage of this meshing strategy is that it can be adapted to complex geometries.
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/Q-Yzr0Yw0HU" frameborder="0" allowfullscreen></iframe> |
**ALTERNATIVELY**
NOTE: You can either create an unstructured mesh by following the above video or a structured mesh by following the steps below.
Creating a Structured Mesh
Mapped Face Meshing
First, we will apply a mapped face meshing control to the geometry. In the Outline window, click on Mesh to bring up the Meshing Toolbar. In the Meshing Toolbar, select Mesh Control > Mapped Face Meshing. Making sure the face selection filter is selected , select all four faces by holding down the right mouse button and dragging the mouse of all of the quadrants of the geometry. When all of the faces are highlighted green, in the Details view Window select Geometry > Apply. Next, select
...