...
1) Start the Tandberg system
Be patient since the Tandberg system takes a while to boot up.
- Ensure LG TV is on.
- Lower on using LG controller, or via power button to the right of the LG TV.
- Select input HDMI 4.
- Use either LG controller or side buttons of TV itself.
- FYI: The Mac mini is on HDMI 1.
2) Connect it to Zoom
Press phone book button on Tandberg controller.
- Bouton looks like an open book, and iis to the left of the Home button.
Select "My Contacts", and then select Zoom, and finally select "Call".
- On Tandberg controller, use arrows to navigate, and the center "check mark" to select entries.
3) Enter Zoom Meeting ID and join the meeting
Press number keys on Tandberg controller.
- Thiis is a unique 9-digit number for the meeting itself
Press the # key to join.
4) End the Zoom session
On Tandberg controller, press the red hang-up phone button.
Notes using the Tandberg system:
...
Ensure BOTH LG (TV) volume is adjusted AS WELL AS the volume of the Tandberg system.
- If either is mute or too low, will not hear anything.
- LG TV's volume controllable with LG controller, or via volume switches to the right of the LG TV.
- Tandberg volume controllable with Tandberg controller.
- Tandberg's mute status shows on-screen.
Microphone mute
- Toggle mute of microphone either by clicking mute button on Tandberg microphone pad, OR clicking mute button on Tandberg controller.
- Mute status shows on-screen.
Tandberg camera direction (panning) and zooming in and out
...
March 2018: Oliver spent time with the Tandberg C20 (Cisco) system, <av.emc2.cornell.edu>. Wondering if/ how to use it with Zoom. At that time, not promisingThese were his notes, FWIW:
1) Is system capable? "The system must be running TC 5.0.2 or higher or CE software to support OBTP (One Button To Push)."). Not listed as supported, either Standard nor Enhanced:
...