Page History

...

Since so many study cases have been done for this problem, it is easiest to validate our simulation against those cases. In this tutorial, “Backward-Facing Step Flows for Various Expansion Ratios at Low and Moderate Reynolds Numbers” by G. Biswas, M. Breuer, and F. Durst will be our study case, and the streamlines will be compared to the simulation. In order to plot a streamline in AIM, select Streamline from the Add drop down menu. Select the Inlet as the Seed location, change the Distribution to Based on mesh, change N to 5, and change the Direction to Forward and backward. 

Image Modified

A second steamline will be created to show the recirculation behind the step, using a plane located inside the recirculation region as the Seed location. Return to the Results task, select the small step wall using the Face selection tool, and then create a plane by pressing the Add Plane button.  Using the blue arrow, drag the plane to a location downstream of the step, about 1.5 times the step height away from the step.  Return to the Results task and select Streamline from the Add drop down menu. Select the newly created Plane as the seed location, change the Distribution to Based on mesh, change N to 2, and change the Direction to Forward and backward. The following image is a zoomed in picture of the eddy found at the corner of the step.

...