Physics Setup

Assign Material Properties

The material Cornellian that was created earlier needs to be applied to the beam. In order to do so, expand Geometry, Image Removed. Next, click once on Line Body, Image Removed, which will appear underneath Geometry. Then expand Material which is located under Details of Line Body. Then click on the arrow on the far right and change the specified material to Cornellian as shown below. Now ANSYS will use the correct Young's Modulus while forming the element stiffness matrices.
Image Removed

Fix The Left Side of The Beam

...

Apply a Point Force to The Right Side of The Beam

...

Go to Step 5: Numerical Solution

...