General Program Information
Wiki Markup |
---|
{float:left|border=2px solid black} [!1b.bmp|width=330px!|AutoCAD Cross Program] [!1.bmp|width=330px!|AutoCAD Cross Program] Southeast Isometric View {float} |
Input Definitions
Inputs Needed to Call the Cross Function
origin - a 3*1 matrix with x,y,z positions corresponding to the point where the tee will be drawn.
ND - The nominal diameter of the pipe. This value along with the pipe schedule is used to determine other actual dimensions of the elbow
EN - The enumerated pipe schedule type. Each schedule of pipe is represented by a specific number within our code.
Inputs Defined within the Cross Database
R1 - The inner radius of the main pipe, defined by outerradius(ND)
R2 - The outer radius of the main pipe, defined by innerD(ND,ED)/2
R3 - The outer radius of the sockets of the tee, defined by ConRadius(ND)
L - The length of the main pipe of the tee, defined by ShortTeeLength(ND)*2
H - The depth of the sockets of the tee, defined by SocketDepth(ND)
Inputs Defined within the Cross Function
p1 =
- x : origin0
- y : origin1
- z : origin2
p17 =
- x : origin0
- y : origin2 + R2
- z : origin1
p18 =
- x : origin0
- y : origin2
p19 =
- x : origin0
- y : origin2 + zc
p20 =
- x : origin0 - L/2
- y : origin1
- z : origin2 + L/2
p21 =
- x : origin0 + L/2
- y : origin1
- z : origin2 + L/2
p22 =
- x : origin0 - L/4
- y : origin1 - R1
- z : origin2
p23 =
- x : origin0 + L/4
- y : origin1 - R1
- z : origin2
p24 =
- x : origin0
- y : origin1
- z : origin2 + L/2 - R3
ND = The nominal diameter of the pipe.
R1 = the inner radius of the main pipe.
R2 = the outer radius of the main pipe.
R3 = the outer radius of the four sockets of the tee.
L = the length of the main pipes of the tee.
H = the length of the four sockets of the tee.
win1 =
- x : origin0 - (L/2 + H)
- y : origin1 - R3
- z : origin2
win2 =
- x : origin0 + (L/2 + H)
- y : origin1 + R3
- z : origin2
EN = The pipe schedule
Technical Program Outline
Wiki Markup |
---|
{float:left|border=2px solid black} [!1a.bmp|width=240px!|AutoCAD Cross Program] {float} |
The Cross program is built on the Tee Program.
Tee1 - builds a tee with origin p1, nominal diameter ND, and pipe schedule EN.
Tee1 <--Tee(p1,ND,EN)
p1 = origin
ND = The nominal diameter of the pipe.
EN = The pipe schedule
Wiki Markup |
---|
{float:left|border=2px solid black} [!2.bmp|width=240px!|AutoCAD Cross Program] Before mirror3 [!2c.bmp|width=360px!|AutoCAD Cross Program] After mirror3 {float} |
mirror3 - mirrors the tee around the centerline of the main pipe, using p17 to select the tee, then reflecting it over a mirror line created using p18 and p19 to give the slope and direction of the mirror line.
mirror3 <-- mirrorA(p17,p18,p19)
p17 =
- x : origin0
- y : origin2 + R2
- z : origin1
p18 =
- x : origin0
- y : origin2
p19 =
- x : origin0
- y : origin2 + zc
Wiki Markup |
---|
{float:left|border=2px solid black} [!3.bmp|width=560px!|AutoCAD Cross Program] {float} |
cylinder7 - creates a cylinder of radius R2 within the cross.
cylinder7 <-- cylinderB(p20,R2,p21)
p20 =
- x : origin0 - L/2
- y : origin1
- z : origin2 + L/2
R2 - the outer radius of the main pipe.
p21 =
- x : origin0 + L/2
- y : origin1
- z : origin2 + L/2
Wiki Markup |
---|
{float:left|border=2px solid black} [!4a.bmp|width=480px!|AutoCAD Cross Program] [!4b.bmp|width=280px!|AutoCAD Cross Program] Free Rotation used to show the cross is now hollow {float} |
subtract4 - subtracts the cylinder from the cross creating a hollow pipe, by selecting the 2 separate halves of the cross as the objects to be subtracted from by using p22 and p23, and selecting cylinder7 as the object to be subtracted by using p24. During the process of subtraction, the two separate pieces are unioned to act as one unit.
subtract4 <-- subtractB(p22,p23,p24)
p22 =
- x : origin0 - L/4
- y : origin1 - R1
- z : origin2
p23 =
- x : origin0 + L/4
- y : origin1 - R1
- z : origin2
p24 =
- x : origin0
- y : origin1
- z : origin2 + L/2 - R3
Wiki Markup |
---|
{float:left|border=2px solid black} [!1.bmp|width=330px!|AutoCAD Cross Program] {float} |
viewfront2 - sets the workspace so that the user is viewing the object from the front.
viewfront2 <-- viewfront1