Page History

...

In ANSYS version 14.5, only the pipe cross-section below the centerline is displayed after using the mirroring option in this menu. You can work around this by applying the mirroring condition in the "Default transform" setting. To do this select "Default Transform" in the left-hand menu , uncheck by double-clicking on it.  Uncheck "Instancing Info from Domain", check "Apply Reflection" and select to mirror about the ZX Plane.

...

After you click Apply, you should get a Temperature Contour plot in the graphics window similar to the one below (your temperature values may be slightly different). In the following our plot, we have turned off the (unstretechedunstretched) wireframe by going to Outline > User Locations and Plots and on the left and unchecking Wireframe. 

You can save the image to a file using the camera icon highlighted below or using the Snipping Tool in Windows 7 (you can search for it under Start > Programs).

...

Name it "Wall"  (with capital W; otherwise you'll get a conflict with a reserved name). On the lower left panel, you will see Details of Wall. Enter the start and end locations of the line and the sampling frequency. Click Apply.

You will see wall Wall created under User Locations and Plots.

...