Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Exercises
...
Repeat the optimization problem in the tutorial but with four design variables: H, W, R, T (thickness). Use the same Young's modulus and Poisson ratio: 30 x 10^3 ksi and 0.3, respectively.
Constraints
Maximum effective stress < yield value (32.5 ksi)
Bounds:
Parameter | Minimum Value | Maximum Value |
---|---|---|
Height (H) | 10 in | 15 in |
Width (W) | 10 in | 15 in |
Thickness (T) | 0.1 in | 0.25 in |
Radius (R) | 1.0 in | 2.5 in |
...
- To plot the response surfaces, you need to set the x, y and z axes highlighted in the snapshot below. Double-click on Response Surface in the Project Schematic to get to this menu.
...