Ariel Seidner's Individual Contribution Page
Spring 2014 Contributions
As part of the LFSRSF team in the Semester of Spring 2014, I helped complete the construction and documentation of the LFSRSF. I, along with the team, succeeded in documenting the entire construction of the filter, designed a new sand drain, made some modifications to the previous design and also initiated backwash. Along the entire process I helped in manufacture, such as drilling and milling and helping my team mates along the entire way. I also made sure that the filter was safe to use by checking that the filter was stable with a center of mass calculation. By the end of the semester we accomplished what we wanted, granted that we came a little short of using the filter with clay and coagulant. However, the filter is ready to be used and tested in the future, with the hopes of further improving the design.
As a new member of the Low Flow SRSF my intentions for this year is to assist the team in realizing the goal of running the LFSRSF and to ensure a smooth and successful operation. In order to achieve this goal we must construct a recycling system that will provide a continuos source of water. We must install and test various components including the slotted manifolds, the sand drain and the sand itself. We will also begin to collect data on the system. We will look for parameters such as headloss through the filter and its multiple components as well as the distribution of flow within the filter column.
As of now the construction of the LFSRSF is going smoothly and the team has good expectations. I have performed the stability test of the system, helped finish the recycling system, the sensor port installation, and assisted in leak tests. Also, the trunks have been installed and the holes where the slotted branches (key component of the filter column) have been drilled. We will soon be ready to test the entire column.
Fall 2013 Contributions
As a member of the Ram Pump team, I'm happy to say that the semester proved to be quite successful. At the beginning of the semester the Ram Pump team started with one mission it needed to accomplish: to create a Ram Pump that would deliver 70mL/s to the chemical stock tanks and the bathrooms of the AguaClara plant in Honduras. Although we did not reach this goal, we succeeded in ways that we did not expect.
Before I explain what transgressed throughout the semester in Hollister Lab 160, I have to make it very clear that the team worked together on almost all aspects of the project, and had we not done so, I believe we would not have the success we now have. Now, myself, along with the other group members, first constructed a fundamental laboratory component, the Simulation System. The Simulation System was not an option. Without it, it would be highly unproductive to test the ram pump given that large amounts of water would be wasted and the laboratory infrastructure itself could not provide the necessary water flow. The entire system was composed of two main parts. First, the main component is the headloss system. This is an arrangement of pipes that simulates the height against which the ram pump would have to pump water. The second part is the recycling system which brings water that is ejected from the waste valve and is carried back to the source so that it can be reused. This was an incredibly important part of the project and will be used in many semesters to come. As we completed this part we proceeded to test the existing design and collect data. I also helped to develop a theoretical limit of how much water a ram pump could possibly deliver. After having collected data from the necessary parameters we compared it to a commercial ram pump that that had been purchased and whose performance data was also collected. The comparison yielded a definite winner, the commerical ram pump, yet nonetheless it was also unable to deliver the 70mL/s that the team hoped for. To our surprise, the existing design from AguaClara was not too far out from the commercial pump and after having investigated the possibilities of why this was so, we incorporated new design considerations into a AguaClara model 2. The next blew our minds off! It delivered less than the previous model. I was quite bewildered and perplexed. Yet fate would come to help! We discovered a significant leak, fixed it and ran the pump one more time. The first trial yielded a HIGHER flow rate than the commercial pump! We where all extremely excited. This would be the design that we would take to Honduras.
Spring 2014 Contributions
As a new member of the Low Flow SRSF my intentions for this year is to assist the team in realizing the goal of running the LFSRSF and to ensure a smooth and successful operation. In order to achieve this goal we must construct a recycling system that will provide a continuos source of water. We must install and test various components including the slotted manifolds, the sand drain and the sand itself. We will also begin to collect data on the system. We will look for parameters such as headloss through the filter and its multiple components as well as the distribution of flow within the filter column.
As of now the construction of the LFSRSF is going smoothly and the team has good expectations. I have performed the stability test of the system, helped finish the recycling system, the sensor port installation, and assisted in leak tests. Also, the trunks have been installed and the holes where the slotted branches (key component of the filter column) have been drilled. We will soon be ready to test the entire column.