...
h3. Fall 2013 Contributions
The Arsenic Team is currently at the end of its preparation phase. So far this semester, I have supported the team by location and searching for necessary chemicals for the upcoming experiments. This semester, we require groundwater solution, which will be used as the basis for our sample solution. We also need diluted arsenic solution, nitric acid and permanganate. I also determined the sample tubes as main vessel for our experiment. This test tube has to fit in both the centrifuge and the carousel tray in the GFAAS. Professor Richardson gave us a variety of centrifugal tubes to test. These tubes come in two sizes both with sloped bottoms: 1,000 uL and 500 uL. Unfortunately, both sizes do not find the carousel slot. The large one is simply too wide, and the small one is too tall. The GFAAS also has its own 500 uL tube, which fits the carousel perfectly. However, it does not fit any centrifuge in available. Therefore, I came up with a hybrid solution, which is to place the small centrifugal tube inside the GFAAS tube when placing in the carousel. However, I will have to ensure that this odd configuration of tubes will not impede the machine in any ways.
Besides preparation, I also contributed to literature research. My main focus was on a paper by Katsoyiannic and Zouboulis on adsorptive filtration using coated polymeric materials, which is an emerging technology in water treatment process. The experiments in this study may be outside of our scope this semester. However, it provided us with possible alternatives to remove arsenic in groundwater, which we may study more intensively in the upcoming semestersI haven't contribute anything to the team. I am now reading previous researches on Arsenic.