Page History

...

This will create a new sketch. In the Outline window, return to the Sketching tab. Again, select the tool. Draw a line from the vertex of the wedge to the top of the geometry. Make sure that when you click a vertex, a "P" appears (meaning point, constraining the line to the vertex), a "V" appears on the line (meaning vertical, putting a vertical constraint on the line), and a "C" appears when you click on the top line (constraining the newly created line to the top line). Right before you make your second click to define the line, make sure it looks like this:

The line will turn dark blue if you have done this correctly (meaning the line is fully constrained) Now, we need to create a line body from this sketch. In the menu bar, go to Lines from Sketches. In the graphics window, select the line you just drew. In the Outline window, select Base Objects > Apply. Finally, press Image Added

Tools > Projection. First, you will need to select an edge. Select the middle vertical line. In the details window, select Edges > Apply

...