...
When the dimensions have been correctly applied, the geometry should look like this:
Line body
First, we need to create a line body of the sketch. In the Menu bar, go to Concept > Lines from Sketches. Click any point on the sketch. In the details window, select Geometry > Accept, then press . The line body should now appear in the Outline window
Create Surface
Next, we need to create a surface from the sketch. In the menu tool bar, select Concept > Surface from EdgesSketches. In the graphics window, the perimeter of the sketch by either holding CTRL and selecting each line, or holding down the left mouse button and dragging the cursor over each line. select any line of the geometry.
Next, in the details window, select Edges Base Objects > Apply. Finally, press . The geometry should now look like the figure below.
...