Page History

...

The final sketch should look like the image below

Backup for SSF tutorial

Constraints

Next, we want to add constraints to the sketch. In the Sketching Toolboxes window, select the Constraints tab. We want to add horizontal and vertical constraints to the lines we drew for the wedge. First, select the Horizontal Constraint tool Image Added. Next, select the top right edge of the geometry, shown below

Image Added

Next, select the Vertical Constraint tool, and select the right edge of the geometry

Image Added

Dimensions

Next, we need to add the dimensions for the geometry. In the Sketching Toolboxes window, select the Dimensions tab. Next, select the general dimensioning tool . To create a dimension, you first select a line. This will create a dimension for that line. Next, you will need to place the dimension next to the line. See the image below for guidance.

...

When the dimensions have been correctly applied, the geometry should look like this:

Line body

First, we need Finally, right click the center vertical line, and select Delete. We are now ready to create a surface.line body of the sketch. In the Menu bar, go to

Create Surface

Next, we need to create a surface from the sketch. In the menu tool bar, select Concept > Surface from Sketches. In the graphics window, select and line of the sketch. Next, in the details window, select Geometry > Apply. Finally, press . The final geometry should look like the figure below.

...