Wiki Markup |
---|
{panel} Author: Ben Mullen, Cornell University {color:red}{*}Problem Specification{*}{color} [1. Pre-Analysis & Start-Up|ANSYS WB - Thermal Stresses in a Bar - Pre-Analysis & Start-Up] [2. Geometry|ANSYS WB - Thermal Stresses in a Bar - Geometry] [3. Mesh|ANSYS WB - Thermal Stresses in a Bar - Mesh] [4. Setup (Physics)|ANSYS WB - Thermal Stresses in a Bar - Setup (Physics)] [5. Solution|ANSYS WB - Thermal Stresses in a Bar - Solution] [6. Results|ANSYS WB - Thermal Stresses in a Bar - Results] [7. Verification & Validation|ANSYS WB - Thermal Stresses in a Bar - Verification & Validation] {panel} h1. Problem Specification A steel bar (E = 2.0E10 Pa, v = 0.3) with the dimensions shown below placed between two walls. On one side, the bar is rigidly fixed to the wall and on the other, there is a 2 mm gap between the wall and the bar. What is the stress in the bar after the temperature increases 100 {latex}$ 100^{\circ} C ${latex} C |
Page History
Overview
Content Tools