Christopher Inferrera's Spring 2011 Contributions (Invent Team - Stock Tank Mixing)
I have conducted a literature review of scientific journal articles and research reports on the properties of PACl and alum as coagulants for water treatment. Specifically, properties of interest that I focused my research on were viscosity and solubility, both important factors for mixing solutions of either material.
I developed the design for the mixing reactor (the "double bucket") that our team is currently creatingtested early on in the semester. One benefit of using this mixing reactor is the fact that no matter what the inflow is (even if it is zero) , the coagulant will stay saturated. In addition, this design has the potential to achieve very high concentrations of coagulant (upwards of 300 grams/liter). This is an important benefit as it would allow operators to achieve necessary levels of coagulant concentration during treatment operations with smaller batch sizes. As of this wiki update, we are still collecting data and running experiments, but preliminary results show promise for this mixing reactor.
Unfortunately, we discovered that the head pressure necessary to push the coagulant solution through the pores was to high to allow for reasonable use in AguaClara plants. If we were to increase the pore size, undissolved granules of coagulant could potentially make their way into the stock tank.
Together with my teammates, I worked on the 'upflow' mixing reactor design and testing. I worked with my teammates on the 'simple stirrer' design. I, along with my teammates, created a MathCAD file that calculated the potential energy difference between a fully homogenized solution of PACl and an unmixed solution of PACl (a solution with a strong concentration gradient). This MathCAD file also calculated the energy input of the stirrer given the dimensions of the stirrer.
I helped design and build a prototype for the rotating centrifugal pump. I, along with my teammates, tested this design in the laboratory setting. Preliminary results were inconclusive, and further testing will have to be done by future teams.
I worked on experimental procedures for mixing reactor testing. I worked on experimental procedures for testing the mixing reactor. I, along with my team members, conducted tests that examined the feasibility and efficiency of the mixing reactor. As stated above, preliminary results were promising.
I made multiple visits to supply stores to purchase materials necessary to our experiments. I also inquired at engineering supply firms on the feasibility of using industrial viscometers to experimentally measure the viscosity of alum solutions and PACl solutions.
In addition to the above, I have helped my team create reflection reports, the teach-in, final report, final presentation and other course related documents.This wiki is currently a work in progress.
Our team only had three members. Because of this, we almost always combined our efforts worked towards the same goals at the same time. Every team member worked extremely hard this semester and certainly was a huge benefit to the team.