...
Once the edges are selected, in the Details View Window select Geometry > Apply. Next, select Type > Number of Divisions. Change the Number of Divisions to 50
. Select Behavior > Hard. We also want the mesh to have a bias, so select the first bias type: Bais > ----- — - -, and give the edge sizing a Bias Factor of 70
150
. The Edge sizing should now look like this:
...
Notice that the element sizes get smaller towards the airfoil. This will give us a better resolution around the airfoil where the flow gets more complicated. Create a new edge sizing with the same parameters, but choose the remaining straight edges (see figure below). The number of divisions will still be 50, but now will be selecting a different biasing type by selecting the second Bias option: Bias > - - — -----. Again, set the Bias Factor to 150
Note |
---|
Edge Bias |
...