Float Calculation
Write what you want here
Blah
Contributors
- "Yoon Choi, yyc6@cornell.edu"
- "Dale Johnson, dejohn@gmail.com"
...
Calculations for the dual scale system .
Refer to LeverArmLength to determine a lever arm length and the maximum angle to use for a given elevation difference
We calculated our float to weigh 4.95 lbs with a diameter of 6 inches and 4 inches of thickness.
The float design parameters The size of the float can be determined using a moment balance around the pivot of the lever arm. This is to ensure that a change in head in the entrance tank will cause a similar change in the relative height of the float. The float was sized using the same float sizing algorithm used by the linear CDC.
...
- Final Float Design Parameters and Calculations
- Float protype for Mar March 2010 EPA Competition