...
Task | Completion Date | ||
---|---|---|---|
Solve the puzzle of different predictions from 2D and periodic 3D models | 2/13 | ||
Finer mesh | 2/13 | ||
Run simulation on SGI servers | 2/13 | Run simulations with Reynolds Stress Model - preliminaries | 2/13 |
Check grid convergence of 3D models with different meshes and the sensitivity of the solutions to other parameters | 2/20 | ||
Run simulations with Reynolds Stress Model - Check grid convergence and the sensitivity of the solutions to other parameters in 2D - preliminaries and convergence check (grid, other parameters) | 2/20 | ||
Start to write UDFs in 3D models for parameter analysis | 2/20 | ||
Literature research on similar simulation cases | 2/20 | ||
Run simulations with Reynolds Stress Model - Compare model performance(time,convergence, etc.) with other models | 2/27 | ||
Literature research on experimental data of similar flows | 2/27 | ||
Compare different turbulence model with experimental data | 2/27 | ||
Literature research on turbulence models | 3/5 | ||
Finalize the choice of turbulence model | 3/5 | ||
Write up Mid-term results | 3/8 | ||
Model flocculator in a larger scale (more turnings) | 3/15 | ||
Explore the different geometric space | 3/22 | ||
Read up literature on flocculator geometry | 4/1 | ||
Quantitative analysis: dimensionless parameters and statistical analysis | 4/8 | ||
Complete Rough draft for Final Report | 4/24 | ||
Final Report Due | 5/6 | ||
Final Presentations | 5/9 |