...
Now we will set the residual values (the criteria for a good enough solution). Once again, we'll set this value to 1e-06.
(click picture for larger image)
Click OK.
Solve > Monitors > Force...
...
Lastly, set the Force Vector components for the lift. The lift is the force perpendicular to the direction of the freestream. So to get the lift coefficient, set X to -sin(1.2°)=-020942 and Y to cos(1.2°)=0.9998.
(click picture for larger image)
Click Apply for these changes to take effect.
...
Now, set the reference values to set the base cases for our iteration. Select farfield1 under Compute From.
Click OK.
Note that the reference pressure is zero, indicating that we are measuring gage pressure.
...