Table of contents
Teams that do this
Baja, FSAE
Chemicals involved & MSDS for each (should also be included in confluence SDS)
Chemical | MSDS |
---|---|
CTD-133 “prepreg carbon fiber” (Baja) | See folder |
PMT-F4, aka “prepreg Kevlar” (Baja) | See folder |
MTM-57 (FSAE) | See folder |
Frekote FMS | https://compositeenvisions.com/content/sds/mold_releases/model-1407-frekote-fms-sds.pdf |
Frekote 700-NC | https://www.pccomposites.com/wp-content/uploads/2015/07/PCFK700-1GP_SDS_2.pdf |
Safety Gear
- Nitrile gloves
Step by step
- Lift the super heavy roll of frozen prepreg out of its box. Unroll a bit of the prepreg on a clean flat surface. Slice across the prepreg using the knife.
- Prep the molds with seal & release.
- Lay the carbon fiber/kevlar prepreg on to the molds.
- Add peel ply, perf, and breather on top.
- Seal inside a vacuum bag with mastic around the edges.
- Put into the oven and connect the layup to the vacuum hose. Program the correct cure cycle into the oven and start it.