Depending on the mesh used, values for the torque on the blade can range from 0.02 to 0.04 N-m for the simulation as it was shown in the videos. Newer versions of ANSYS may use a different cell count, mesh quality, and solver algorithm which accounts for this discrepancy.
In CFD-Post, when calculating the torque, newer versions of ANSYS do not let you select "Air" as the fluid. The two options under the "Fluid" dropdown are
<iframe width="560" height="315" src="https://www.youtube.com/embed/YUpm_AREKj0" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> |
Go to Step 7: Verification & Validation
Go to all FLUENT Learning Modules