The meshing process is:
1. Create named selections (inlet, outlet1, outlet2, wall_artery and fluid_zone).
2. Change the Global Mesh settings.
3. Add Local Sizings to refine the mesh (inflation mesh and body sizing).
4. Preview automatically generated inflation mesh and finally, generate the volume mesh.
The videos below show you how to create the mesh for the fluid domain.
<iframe width="600" height="338" src="//www.youtube.com/embed/8NUixCggw2w" frameborder="0" allowfullscreen></iframe> |
Summary of steps in the video above:
<iframe width="600" height="338" src="//www.youtube.com/embed/lESMus1uS6Y" frameborder="0" allowfullscreen></iframe> |
Summary of steps in the video above:
<iframe width="600" height="338" src="//www.youtube.com/embed/ILC5D0X-Paw" frameborder="0" allowfullscreen></iframe> |
Summary of steps in the video above:
Comparison of the surface mesh before and after changing the minimum mesh size:
Before setting minimum element size:
After setting minimum element size:
<iframe width="601" height="338" src="//www.youtube.com/embed/nhV-x3yRNV0" frameborder="0" allowfullscreen></iframe> |
Summary of steps in the video above:
Go to all FLUENT Learning Modules