In Mechanical, we will look at a few important results such as deformation, Von-Mises stress, and the reaction forces and moments. Note that the bending moments experienced by the blade would be in the opposite direction to the reaction moments.
<iframe width="640" height="360" src="//www.youtube.com/embed/2Zl5riCGcZs" frameborder="0" allowfullscreen></iframe> |
Summary of steps in the above video:
Note: In version 2019 R2 we were unable to open the FEA results in CFD-Post. This is not critical to the tutorial, so if you get an error during this step, please skip to the next step.
A very nice feature of ANSYS is to be able to look at both the FEA and the CFD results together in CFD-Post. We show you how to do this in the following video.
<iframe width="640" height="360" src="//www.youtube.com/embed/oYukRU6tKuQ" frameborder="0" allowfullscreen></iframe> |
Summary of steps in the above video:
Go to Step 7: Verification & Validation
Go to all ANSYS Learning Modules