# Cantilever Beam Modal Analysis

Created using ANSYS AIM 17.1

## Problem Specification

Consider an aluminum beam that is clamped at one end, with the following dimensions.

Length | 4 m |
---|

Width | 0.346 m |
---|

Height | 0.346 m |
---|

The aluminum used for the beam has the following material properties.

Density | 2,700 kg/m^3 |
---|

Youngs Modulus | 70x10^9 Pa |
---|

Poisson Ratio | 0.35 |
---|

Using ANSYS AIM find the first six natural frequencies of the beam and the mode shapes.

**Go to Step 1: Pre-Analysis and Start-Up**

Go to all ANSYS AIM Learning Modules