{include: ANSYS Google Analytics} {include: Bike Crank - Panel} h1. Numerical Results h3. Deformed Shape The following video shows how to plot the deformed shape and use it to check if the displacement constraints have been applied correctly. \\ {html}<iframe width="600" height="338" src="//www.youtube.com/embed/yVtxuL9Nxy8?rel=0" frameborder="0" allowfullscreen></iframe>{html} \\ h3. {latex} {\bf $\sigma_x$}{latex} Contours We next take a look at {latex} $\sigma_x${latex} variation in the model. \\ {html}<iframe width="600" height="338" src="//www.youtube.com/embed/35YXCKqC1Ng?rel=0" frameborder="0" allowfullscreen></iframe>{html} \\ You can save an image of the contours to a file using the instructions below. \\ {html}<iframe width="600" height="338" src="//www.youtube.com/embed/4PGJ90-lg0o?rel=0" frameborder="0" allowfullscreen></iframe>{html} \\ Below, we take a closer look at the {latex} $\sigma_x${latex} variation on the front face and compare it to what we expect from beam bending theory. \\ {html}<iframe width="600" height="338" src="//www.youtube.com/embed/1YSyadkkzms?rel=0" frameborder="0" allowfullscreen></iframe>{html} \\ We interrogate {latex} $\sigma_x${latex} variation in the interior of the model using "section planes". \\ {html}<iframe width="600" height="338" src="//www.youtube.com/embed/YM_YUta3-78?rel=0" frameborder="0" allowfullscreen></iframe>{html} \\ h3. {latex} ${\bf \sigma_x}${latex} along a Line using "Path" Operations First, we create two coordinate systems which we'll use to define the start and end points of the line. \\ {html}<iframe width="600" height="338" src="//www.youtube.com/embed/R-w8mA2MzSk?rel=0" frameborder="0" allowfullscreen></iframe>{html} \\ Second, we create the desired line on the front face. \\ {html}<iframe width="600" height="338" src="//www.youtube.com/embed/MW2jSeEfHpw?rel=0" frameborder="0" allowfullscreen></iframe>{html} \\ Last, we extract {latex} $\sigma_x${latex} along the line and export the results to an Excel file. \\ {html}<iframe width="600" height="338" src="//www.youtube.com/embed/kJfABDOVfIo?rel=0" frameborder="0" allowfullscreen></iframe>{html} \\ \\ [*Go to Step 7: Verification & Validation*|Bike Crank - Verification & Validation] [Go to all ANSYS Learning Modules|ANSYS Learning Modules]\\ \\ |