{include: ANSYS Google Analytics}
{panel}
[Problem Specification|ANSYS - Large Telescope Truss]
*1. Pre-analysis*
[2. Geometry|Large Telescope Truss - Geometry]
[3. Mesh|SIMULATION:Advanced FEA for Large Telescope Truss - Mesh]
[4. Setup (Physics)|SIMULATION:Advanced FEA for Large Telescope Truss - Setup (Physics)]
[5. Solution|SIMULATION:Advanced FEA for Large Telescope Truss - Solution]
[6. Results|SIMULATION:Advanced FEA for Large Telescope Truss - Results]
[7. Verification and Validation|SIMULATION:Advanced FEA for Large Telescope Truss - Verification and Validation]
Exercises
{panel}

h2. Step 1: Pre-analysis

{composition-setup}
cloak.toggle.type = none
{composition-setup}
{cloak:id=cloaked}
Highlight each line of the above panel and insert the appropriate links to the other pages of your tutorial

Highlight the bold line at the bottom of the page that read "Go to Step...".  Insert the appropriate link to the next page of your tutorial.

Enter any relevant text, images, and videos in the space under where it says "cloak" below
{cloak}

Before we start with the tutorial, we need to define our goals and our setup, and what sort of simplifications we can make in our geometry.

First, we want to find the stress and deformation of the structure when it is at its greatest force. Due to the motion of the Telescope, the truss will have a maximum of 90 degrees of rotation, which we expect will have the greatest deformation and stress for the material.

Therefore, we will model the gravity at 90 degrees rotated to the model.

 !gravity.jpg|border=1,height=300!


Now, we wonder about the simplifications we can make in the model.  We notice that the truss bars can be modeled as beams, and so we will replace the solid geometries with line bodies with a cross-sectional area. This will reduce and simplify the model, decreasing the computational time while keeping the same validity.

h2. Engineering Data

For simplicity's sake, we will let our geometry be defined as Structural Steel.


[Go to Step 2: Geometry|Large Telescope Truss - Geometry]
[Go to all ANSYS Learning Modules|SIMULATION:ANSYS Learning Modules]