Created using ANSYS 13.0
This tutorial is based on this M.Eng project report completed at Cornell University in 2011. In this exercise, we will examine the stresses and deformation of a wind turbine blade under a force load.
https://confluence.cornell.edu/download/attachments/151192795/BladeLarge.png?version=1&modificationDate=1310230665000 |
The blade is composed of an outer surface and an inner spar. The spar is 0.02 meters thick and the outer surface is of varying thickness. A table containing the material properties of the two parts is below. Structural steel will be used for both the blade and the spar.
|
Spar |
Wind Blade |
---|---|---|
Young's Modulus (Pa) |
2e11 |
2e11 |
Poisson's Ratio |
0.30 |
0.30 |
Thickness (m) |
0.02 |
0.03 - 0.00048485*X |
We are now ready to open ANSYS Workbench
Go to Step 1: Pre-Analysis & Start-Up
Go to all ANSYS Learning Modules