View Source

Most, if not all, research group printers are accessible from anywhere on campus. No VPN or special setup is required other than initial setup. Printing from a non-Cornell network (home, hotel, 3G/4G), requires the use of CUVPN. These instructions presume you are connected either through a wired campus network connection or via RedRover/RedRover-Secure/Eduroam.

Install and configure your print drivers

To install a group printer in Windows 7 (other Windows editions should be similar )

In Devices & Printers – click on "add a printer"
Choose add a LOCAL printer
Create a new port – standard TCP/IP
Enter the printer name for the address
- See label on the printer for the name (please avoid using the IP address )
Finish driver & printer installation by providing the driver as necessary and naming the printer something you prefer. In most cases, your computer will detect & install drivers. Some drivers may require manual installation.

To install a group printer in Mac OS X (editions of Mac OS X might have slightly different wording )

You may want to install the most up-to-date drivers from Apple for your printer before installing ( ex: see http://support.apple.com/kb/DL907 for HP printers )
Open System Preferences and go to Printers and Scanners
Click on the + sign to add a printer
Click on the IP system
Enter the printer name for the address
- See label on the printer for the name (please avoid using the IP address)
Change the protocol to HP JetDirect Socket (even if the printer is not an HP printer)
Leave the Queue empty, name and locate the printer something you prefer and will remember
Correct the printer driver as necessary

----If you have any questions, problems, or concerns on connecting to your group's servers and/or printers, please first attempt to work with your group's computer person and when necessary, please contact Chemistry IT at <crcf@cornell.edu> or stop by 250 Baker Lab for assistance.