{include: ANSYS Google Analytics}
{panel}
Problem Specification
1. Pre-analysis
*2. Geometry*
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
{panel}

h2. Step 2: Geometry

{composition-setup}
cloak.toggle.type = none
{composition-setup}
{cloak:id=cloaked}
Highlight each line of the above panel and insert the appropriate links to the other pages of your tutorial

Highlight the bold line at the bottom of the page that read "Go to Step...".  Insert the appropriate link to the next page of your tutorial.

Enter any relevant text, images, and videos in the space under where it says "cloak" below
{cloak}
The Geometry of the Tertiary Truss is the most complicated part of the design process.  Many hours were spent creating the Solidworks geometry for the truss. This requires many hours and practice in Engineering Design. However, this tutorial focuses on properly analyzing the structure, not creating it from scratch, so we will provide the created geometry.

Click here to download the Solidworks composite .zip.


Unzip the folder, and open up ANSYS.  Use the import button to open up the file "Truss K_SF_2.5_surf_Flex". (Remember to select "geometry file" from the drop down menu.)  This assembly contains all the parts listed in this folder: do not separate the assembly from the parts folder.

After opening and generating the Solidworks import, you should see the entire geometry has been detailed in the window.  You should take this time to familiarize yourself with the structure.

There should be 2 part groups: the Truss K-1, and the Tertiary Subframe Surface.

 *Truss*
!Truss.PNG|thumbnail,border=1,height=200!

*Subframe*
!Subframe.PNG|thumbnail,border=1,height=200!

The remaining Flexure mounts and Rigid mount pad should remain separate.



*Go to Step 3: Mesh*
[Go to all ANSYS Learning Modules|SIMULATION:ANSYS Learning Modules]