Go to Step 1: Pre-Analysis & Start-Up
Consider the beam in the figure below. It is clamped on the left side and has a point force of 8kN acting downward on the right end of the beam. The beam has a length of 4 meters, width of 0.346 meters and height of 0.346 meters. Additionally, the beam is composed of a special material called Cornellian which has a Young's Modulus of 2.8x10^10 Pa and a Poisson ratio of 0.4 .
Go to Step 1: Pre-Analysis & Start-Up
See and rate the complete Learning Module
Go to all ANSYS Learning Modules